Yüksek Hızlı Kağıt Kutu Yapıştırıcı

4/6 ile Otomatik Klasör YapıştırıcıCorner

Model: LG800C (sprey yapıştırıcı sistemi hariç)

Otomatik karton katlama yapıştırma makinesi (LG800), müşterilere daha fazla kâr getirebilecek çok kararlı, yüksek-hacimli bir makinedir.

4/6 köşe işlevi vardır. Her set bağımsız bir motor tarafından kontrol edilir. ESC, PLC, ithal elektronik bileşenler ve üç -kart izleme modu ekipmanı kullanır.

Ana Özellikler

1) Tüm makine, lazerle kesilmiş çelik plakaların yapısını benimser.

2) Tutkal-püskürtme sistemi (üç tabanca ve üç sensör) isteğe bağlıdır.

3) Makine içerisinde bulunan iç kuryeler motorlar ile ayarlanmaktadır.

4) Opsiyonel plazma sistemi.

5) Kutuların işlem verileri bilgisayar kontrol sistemine kaydedilebilir (opsiyonel).

6) Konum göstergesi (opsiyonel)

7) Değişken ayarı.

8) Uzun-mesafe ön-katlama bölümü, ilk sıra için 180 derece katlama, üçüncü sıra için 135 derece katlama, ön-katlandıktan sonra kolayca açılırlar.

Şartname:

Kağıt boyutu

◆ straight line box WL: max 800800 mm min 9060 mm

◆ lock bottom box WL: max 700800 mm min 15060 mm

Beslemeker

◆ MIKI-pulley infinite speed variator 1/set.

◆ Independent adjust feeding belt, ensure the smoothly paper feeding.1set/6pcs,size: 1026308mm

◆ Independent motor, inverter adjust speed, effectively ensure the balance of paper spacing.

◆ Paper carry rod with high performance Taiwan-made vibrating motor.

◆ Air feeding device.(optional)

hizalamabirim

◆ Aligning the askew paper wihch from feeder, make sure the paper running in straight line.

◆ Alignment unit can be adjusted up and down, suitbale for different thickness paper stably.

◆ correct the paper, avoiding the paper going to two sides.

İki kayış: 2145344 mm

Ön -katlama birimi

◆ 2 plate conveyor belt structure, segmenting left and right upper belt plate can be adjusted according to product demand, fast and efficient.

◆ three long top courier in this section, 180 degree folding could be preformed

Nitta kemerleri: 1 takım

özellikler:1985243mm-2pcs 3375243mm-2pcs

5000444mm-1adet 5000244mm-1adet 4755304mm-1adet

Kilitleme-birimi kilitle

◆ 3 plate conveyor belt board structure, segmental upper belt board function is the same as the prefolding part, eliminate the problems in the production of special-shaped box products effectively.

◆ The upper and middle belt board is detachable, depending on product requirements for disassembly and debugging.

◆ Nitta belts 1set /9 pcs

Şartname:

1985243mm-2adet 3375243mm-1adet

1780243mm-2adet 3450244mm- 3adet

3610304mm-1 adet

◆ Safety door (Optional)

yapıştırma ünitesi

◆ The mechanical lower pasting cylinder is designed with separate type of rubber wheel and rubber cylinder, high speed, easy to clean and maintain.

◆ Crashlock, 4/6 corner box ,etc need to equip eletrical spray guns. (recommend 3 or more guns)

◆ width of gluing wheel 4MM (standard), other width could be customized

Katlama ünitesi

◆ 2 plate conveyor belt board structur.

◆ The left and right outside folding belt speed can be adjusted independently to ensure the molding accuracy.

◆ Wide box type can be matched with middle upper and lower belt plate to ensure stable transportation.

◆ Nitta belts 1set /8pcs

Şartname:

2785243mm-1adet 4565243mm-1adet

3175243mm-1adet 7320344mm-3adet

7520354mm-2 adet

preslemebirim

◆ Independend inverter adjust speed, proportional linkage to main engine under automatic model, adjusting separately with the same speed as the main engine under manual.

◆ Upper and lower belt telescopic adjustment is simple and easy to operate.

◆ Equipped with high speed electronic kick counter.

Taşıma birimi

◆ In automatic mode, the paper box spacing is set. The pressure belt speed is connected with the belt speed of the main engine in proportion. When photoelectric monitoring the paper box, the leather moves.

◆ In manual mode, the pressure belt is delivered at a constant speed, which is not affected by the machine speed.

◆ The pressure part adopts the pressure type pressing, the pressure control is more accurate, the product bonding effect is more guaranteed.

4/6 köşe işlevi (Opsiyonel)

◆ All types and most sizes of 4/6 corner boxes can be quickly set up.

◆ the inclined frame according to the page size of the paper box adjustable.

◆ 45 degrees guide plate, suitable for all the size of the paper box.

◆ modular folding hook running track, high speed and high quality production.

Elektrik ve tahrik sistemleri

◆ Schneider brand inverter is used to realize synchronous speed regulation of the main engine, making the speed change, adjustment, stability and reliability.

◆ Humanized design of hd touch screen, fully consider the operator's convenience.

◆ Schneider brand PLC is adopted, and a number of safety protection devices are added, making the operation of the machine more safe and reliable.

◆ Control panel, layout more reasonable, icon prompt, simple and easy to understand with remote control switch, make the operation more convenient.

Ana parça listesi

1.Elektrik parçası

2.Kemer

3.Pnömatik eleman

KUTU ÖRNEKLERİ

Popüler Etiketler: yüksek hızlı kağıt kutu yapıştırıcı, Çin, tedarikçiler, üreticiler, fabrika, özelleştirilmiş, fiyat, stokta